Product Description KLEN 897 is a heavy duty acid based rust and scale remover. It is used to remove scale from a wide range of metal equ...

KLENCO Indonesia - KLEN 897 "Heavy Duty Descaler"

KLENCO Indonesia - KLEN 897 "Heavy Duty Descaler"

KLENCO Indonesia - KLEN 897 "Heavy Duty Descaler"

8 10 99

Product Description

KLEN 897 is a heavy duty acid based rust and scale remover. It is used to remove scale from a wide range of metal equipment & surfaces.

KLEN 897 contains corrosion inhibitors that effectively remove hard scales and metal oxide deposits from surfaces without attacking the base metal itself.

Areas of Use

For use on boilers, condensers, evaporators, heat exchangers, calorifiers, diesel engine cooling systems, air coolers, sea water sides, etc

Special Features

  • Corrosion inhibitors for protection of treated surface.
  • High concentration for economical and effective performance.

Directions for Use

  • Dilute KLEN 897 with water in portion 1: 5. Duration may vary, general guidelines are:
    • For removing hard scales:
    24 to 36 hours
    De-rusting:
    2 to 4 hours
  • System should be vented at highest point to release gases produced during descaling.
  • Solution may be warmed (not exceeding 40oC) to improve efficiency of descaling process.
  • If solution concentration drops to less than 1/2 of initial concentration, add another portion 1:10.
  • Rinse system thoroughly with water and drain completely after cleansing.
  • To neutralize remaining traces of acid, add 2-3% solution of KLEN 1101 to circulate for approximately 2 to 4 hours.

Precaution

Corrosive liquid! A pair of suitable gloves should be worn when using product. Avoid all skin and eye contact. Wash affected areas with plenty of water.