KLENCO Indonesia - KLEN 1308FC "Sealer Hardener"
Product Description
KLEN 1308 is an epoxy based floor coating consisting of a hydrophilic curing agent, fillers, as well as other auxiliary agents. By using KLEN 1308, an epoxy hardener liquid, it can produce attractive floor coatings that are highly durable. With floor materials such as silicon powder, attractive surfaces can be created.
Special Features
- Superior adhesion on metal,cement,rubber and plastic.
- Extremely durable and abrasion resistant.
- Provides attractive appearance with its shiny,lasting and dust-free features.
- Ease of application.
- Tar-free and odourless finishes.
- Colourful floorings can be created by mixing KLEN 1308 colour additives.
Directions for Use
Avoid application if floor temperature is below 13 deg C or above 30 deg C. Atmospheric, floor and product liquid temperatures should always be considered before applying this product.
- This product should be applied from a roller tray and not by pouring directly onto the concrete surface. A high quality, 3/8” nap roller or lambs wool applicator should be used.
- Apply as evenly as possible. To lessen bubbling of coating, avoid excessive agitation of the liquids with the roller or applicator.
Light foot traffic - 24 hours
Heavy duty traffic- 2 to 3 days
Maximum abrasion and chemical resistance- 7 days
Above dry times are based on relative humidity above 50% and temperature of 24 deg C and above.The dry times are only approximate and will vary depending on atmospheric conditions at time of application.
Note: An increase in either temperature or humidity will shorten drying time. Please consult your KLENCO representative for full application instructions.