KLENCO Indonesia - KLEN 1306 "Acrylic Based Sealer"
Product Description
KLEN 1306 offers effective protection for concrete flooring against dusting, chemical and greasy stains. Its durability and recoatability means lower long term cost for maintaining of floors. KLEN 1306 has been formulated for use on all porous building surfaces including concrete, asbestos cement sheet, brickwork and render.
Areas of Use
It is suitable for industrial, commercial and domestic environments, for instance, factory and store floors, car parks, garages, or whenever a non-dusting impervious hardwearing surface is required.
Special Features
- Protects floor against staining from chemicals and soils.
- Prevents concrete dusting.
- Able to withstand heavy traffic and is non-slippery.
- Worn out areas compatible for recoating, conditioning and new multi-coat application.
- Excellent durability, adhesion and abrasive resistance.
- No oxidation or yellowing through weather or aging.
Directions for Use
- Ensure ventilated area and clean floor from grease, dirt and dust before application. Clean or wire brush back to a sound substrate any precoat area.
- Apply by roller, broom, spray or brush. In high porosity case, apply two coats instead of one.
- To obtain non-skid surface, sprinkle clean dry sand onto KLEN 1306 while it is still wet. Dust off excess sand when dry. Apply second coat if necessary.
- Under normal conditions, KLEN 1306 is touch dry in 30 minutes.
- Coverage dependent on type of surface. Reasonable coverage is 4.5-5 sqm/ litre.
- When application is finished, clean all equipment, tools etc with Xylol, Toluol or Acetone.
Precaution
Avoid contact with skin and eyes. Wash with large amount of water and soap upon contact with skin. Flush with water for at least 15 minutes then consult a physician immediately upon contact with eyes. If swallowed, do not induce vomiting. Dilute by drinking water and consult a physician immediately.