KLENCO Indonesia - PREMIUM SILVER "Sealer-Finish"

KLENCO Indonesia - PREMIUM SILVER "Sealer-Finish"

A durable finish made from metal-link acrylic polymers, PREMIUM SILVER provides a shine that lasts through repeated scrubbings with detergent. It is self-priming and thus economical to use.

PREMIUM SILVER is ideal for general applications to various floor types including vinyl, rubber, sealed wood, ceramic and homogenous tiles. Also suitable for quarry tiles and other stone surfaces.

• Optimum solid content of 16%, low enough to use as a sealer on bare floors and high enough to serve as a good finish.
• Provides a shiny and crystal clear gloss without buffing; does not discolour white or light-coloured floors.
• No sealer or undercoat is required unless floor is extremely worn and porous.
• Hard and highly durable to detergent washing and heel marks. Good slip resistant properties.

• Strip old finishes from the floor with a good stripper such as ACTION 150 S. For uncoated floors, clean thoroughly with a floor detergent such as POWER FORCE.
• Remove all soil and water with a wet vacuum cleaner or mop. Mop with clean water to remove all traces of residue.
• Allow floor to dry thoroughly. For porous floors, apply 2 coats of PREMIUM SHIELD sealer first, allowing for drying in between.
• Pour PREMIUM SILVER into a clean bucket and apply uniformly using a clean mop. Allow about 20 min. to dry then apply a 2nd coat. A 3rd coating should be applied, again only when dry, if no sealer was applied.
• Estimated coverage: 50~80 m2/L for 1st coat, higher for subsequent coats.
• Do not return unused polish from the mopping bucket to the container.
• To maintain floor, dust mop daily and wet mop with mild detergents regularly. To improve gloss, spray buff periodically with high speed machines and a good buffing solution such as SUN UP PLUS. When finish is dulled, strip and recoat the floor again.

As with most chemical products, avoid ingestion and eye contact. Wash hands thoroughly after use.