KLENCO Indonesia - POWER STRIP-S "Solvent Based Stripper"

KLENCO Indonesia - POWER STRIP-S "Solvent Based Stripper"

POWER STRIP-S is a blend of high-grade chemical solvents and biodegradable penetrating surfactants. This product is extremely effective in stripping tire marks, paints, inks, adhesives and various other stains and graffiti from hard floors and surfaces, even concrete and some other semi-porous surfaces. POWER STRIP-S will also give fast positive results on tough polish and wax build up on certain types of floors.

This product is highly recommended to remove various types of marks and stains found in commercial and industrial settings such as actories, workshops, garages, warehouses etc. POWER STRIP-S can also be use to strip waxes from vinyl, ceramic and stone floors. Do not use on solvent-based coatings such as parquet, rubber, asphalt, urethane, and epoxy, as gloss will be damaged.

• Effective against the toughest stains and marks where other strippers fail
• Biodegradable

Dilution rates vary according to job requirements, general guidelines as follows:

Normal polish build-up ~ 5 to 10 parts of water
Heavy polish build-up ~ 1 to 5
Tire marks, or other stubborn stains on uneven surfaces ~ 1 to 3 or lower concentrations
• Apply POWER STRIP-S solution liberally to surface. Allow the chemical to soak in for 5 to 10 minutes.
• Agitate the surface thoroughly, preferably with a rotary machine and abrasive pad. Pick up dirty solution with wet vacuum cleaner. Then rinse, mop or wipe with clean water thoroughly at least twice to remove all traces of residue.

As with most chemical products, avoid ingestion and eye contact. If ingested, dilute by drinking water and seek medical help. If product enters eyes, flush with water and seek medical help. Wash hands thoroughly with soap and water after use.